產品描述模擬攝像機德國HYDAC賀德克

工作電壓 [V]    8...32 DC
電流損耗 [mA]    < 150; (包含圓盤加熱)
過壓保護    是
接通峰值電流 [mA]    700
Einschaltspitzenstrom [mA]    700; (t = 2 ms
像場大小 [mm]    
工作距離    像場    zui小的可識別的物體    分辨率
1000    1500 x 1100        
2000    3000 x 3200        
5000    7500 x 5500        
圖像分辨率 [像素]    680 x 480
圓柱形孔徑角 [°]    78
孔徑角    78EMC電磁兼容    
DIN EN 61000-6-4    工業環境
DIN EN 61000-6-2    工業環境
抗沖擊    
50 g
抗震    
頻率范圍 24...2000 Hz    
(15,3 x 9,81 m/s²)rms    PSD (g²/Hz)
0,04...0,1    重量 [g]    310.6
尺寸 [mm]    Ø 55.5 / L = 51.3
原材料    外殼: 鋁 黑色鋁陽氧化處理; 前面透鏡: 浮法玻璃 化學硬化
Sensorart    ¼'' 4:3 VGA CMOS圖像傳感器彩色

產品描述模擬攝像機德國HYDAC賀德克
附件This document applies to devices of the type "PDM360 NG" (art. no.: CR1083 and
CR1087). These instructions are an integral part of the device.
This document is intended for specialists. These specialists are people who are
qualified by their appropriate training and their experience to see risks and to
avoid possible hazards that may be caused during operation or maintenance of
the device. The document contains information about the correct handling of the
device.
Read this document before use to familiarise yourself with operating conditions,
installation and operation. Keep this document during the entire duration of use of
the device.